Remote Control Keyswitch:

Applicable range:

Family, office, supermarket, hotel, hospital, warehouse etc.

Product parameters:

1.      Ultrathin, pure flat style 86*86*33mm

2.      Operating voltage:AC110~240V  AC180~250V(50/60Hz)

3.      Ultra-low power consumption design, standby electric current: 220V 25uA(less than 0.015W)

4.      Operating frequency: 315MHZ  433MHZ  430MHZ  303MHZ

5.      Distance of remote control: within 50 meters(you can choose any type of the remote controller of our company)

6.      Load power: the maximum resistive load of single route is 300W

7.      Environmental temperature: -4F~176F

8.      Sensitivity: -105Db

Product characteristics:

1.      Convenient installation----replace the original wall switch directly and there is no need to change the connections of the lamps and lanterns.

2.      Applicable lamps and lanterns----fluorescent lamp, energy-saving lamp, incandescent lamp, spotlight, halogen lamp etc.

3.      Lightning protection design----holding the lightning protection function, safe and reliable performance.

4.      Partition remote control----remote control behind partition wall(you can remote control the lamps of the living room in the chamber)

5.      Non-interference----non-interference among the products of the same type in the neighbors.

6.      Keeping off when electricity coming----after power cut, the switch keeps off to avoid waste of electricity.

7.      Bidirectional control----you can use the wall switch to control and it is more convenient to use the remote controller.

8.      Centralized remote control----a multikey remote controller can control all the remote control switches of the family.

9.      Group control function----you can set any key of the remote controller to control any multiplex switch, to make the lamps on or off at the same time.

10.  Main switch----you can set the main on key or the main off key, so you can turn on or turn off all the lamps conveniently.

11.  Learn and distinguish----the switches can distinguish any remote controller of the company, you can buy the switches and the remote controller separately and freely, upgrade and collocate by yourselves.

12.  Unique touch code mode, stronger ability of non-interference.

13.  Applicable to any lamp, connecting to the fluorescent lamps without compensatory capacity, no flicker phenomenon.

14.  Ultra-low power consumption design, standby power consumption: <0.011W According to 1 kilowatt=1000W/H, 1 year power consumption=(0.011W*24H*365D)/1000W/H=0.096 kilowatt(ten years’ power consumption less than 1 kilowatt)

News of the remote control keyswitch line:

Many decoration designers choose ganged switches for the owners convenience. However, ganged switches are not economic or convenient to the owners. Nowadays, single live wire remote control keyswitches have joined the ranks, it is outdated to choose the ganged switches.

Single live wire  remote control keyswitch PK ganged switch:

1.      Economical efficiency: the latter needs to pave extra wires, and cost is up to 100 Yuan; the former doesn’t need to pave extra wires.

2.      Aspect of convenience: the former can control the lamp anywhere indoor; the latter can only do that in the limited scope.

3.      Aspect of installment: single live wire switch can replace the common switch entirely, the two have no difference in connecting wires, and they can switchover at anytime.

4.      Aspect of aesthetics: ganged switch has one more extra switch, limiting the move of the furniture.

Distinction of the two:

1.      Difference of technological content. Single wire under voltage remote control switch contains higher technology.

2.      In the aspect of installment, single live wire remote control switch is the same with the common switch.

3.      The ganged switch cannot replace the common switch for it needs the special skills of the electrician.

4.      In the aspect of safety, the single live wire remote control switch doesn’t produce sparkle for the adoption of non contact switch, but the common switch can produce sparkle.

5.      In the aspect of convenience, the former can be controlled not only by the remote controller but also by hand, so you just have to press some keys to turn on(off) the lamps when you are lying in bed, also remote control behind partition wall, it is amused and convenient. The latter can only operate in a permanent position.